ibhena_yephepha

Ixabiso leFektri i-Dx51d Z275 Gi Coil 0.55mm Ubungqingqwa obuphezulu be-Hot Dip Galvanized Steel Coil

Ixabiso leFektri i-Dx51d Z275 Gi Coil 0.55mm Ubungqingqwa obuphezulu be-Hot Dip Galvanized Steel Coil ekumgangatho ophezulu Umfanekiso obonisiweyo
  • Ixabiso leFektri i-Dx51d Z275 Gi Coil 0.55mm Ubungqingqwa obuphezulu be-Hot Dip Galvanized Steel Coil
  • Ixabiso leFektri i-Dx51d Z275 Gi Coil 0.55mm Ubungqingqwa obuphezulu be-Hot Dip Galvanized Steel Coil
  • Ixabiso leFektri i-Dx51d Z275 Gi Coil 0.55mm Ubungqingqwa obuphezulu be-Hot Dip Galvanized Steel Coil

Inkcazo emfutshane:

Ikhoyili yentsimbi egalelweyoliphepha lesinyithi lekhabhoni eligqunywe ngomaleko weizinkingokusebenzisainkqubo yokugaya nge-hot-dipIngubo ye-zinc inika isiphumo esihle kakhuluukumelana nokugqwala, ukuqina kwexesha elidekunyeukhuseleko lomphezulu, okwenza ii-GI coils zibe zezona zinto zisetyenziswa kakhulu ekwakheni nasekwenzeni.


  • Umgangatho:I-AiSi, i-ASTM, i-BS, i-DIN, i-GB, i-JIS
  • Uhlolo:I-SGS, i-TUV, i-BV, uVavanyo lweFektri
  • Inqanaba:Dx51d Dx52D Dx53D, SPCC, SECC, SGCC
  • Ukwaleka kweZinc:30g-550g ,G30,G60,G90,G350,G450,G550, njl.
  • Ixesha lokuzisa:Iintsuku ezili-15-30 (ngokweetoni zokwenyani)
  • Immimiselo yokuhlawula:T/T, LC, Kun Lun Bank, Western Union, Paypal, O/A, DP
  • Ulwazi lweZibuko:Izibuko laseTianjin, izibuko laseShanghai, izibuko laseQingdao, njl.
  • Inkonzo Yokucubungula:Ukuhombisa, Ukusika
    • I-Whatsapp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Ikhoyili egalelwe ngesinyithi,

    Imigangatho Efanayo

    I-ASTM: A653 / CS-B / Udidi lwe-SS

    EN: DX51D / DX52D / S250GD / S280GD / S350GD

    I-JIS: G3302 SGCC / SGCH

    Ukwaleka okuqhelekileyo kweZinc

    Umaleko weZinc: Z40–Z275 (40–275 g/m²)

    Ifumaneka nge-spangle eqhelekileyo, i-spangle encinci, okanye i-spangle engekhoyo.

    Izicelo

    Iiphaneli zophahla kunye nodonga

    Izahlulo zeSakhiwo seNsimbi kunye noLwakhiwo

    Iipayipi ze-HVAC

    Izixhobo zeMoto

    Izixhobo zasekhaya

    IiPurlins, iiPipe kunye neeCable Trays

    Ubungakanani obufumanekayo

    Ubukhulu: 0.13–4.0 mm

    Ububanzi: 600–1500 mm (ingenziwa ngokwezifiso)

    Ubunzima bekhoyili: 3–15 MT

    Isazisi: 508 / 610 mm

    镀锌卷_12

    I-Hot Rolled Steel Coil iveliswa ngama-rolling steel slabs kumaqondo obushushu aphezulu (ngesiqhelo ngaphezulu kwe-1100°C). Le nkqubo iqinisekisa iipropati ezilungileyo zoomatshini, ubukhulu obuzinzileyo, kunye nokwakheka okugqwesileyo. Apha ngezantsi kukho isishwankathelo esicacileyo nesifutshane senkqubo yemveliso:

    1. Ukwenza intsimbi

    Intsimbi, iintsalela, kunye nee-alloys ziyanyibilikiswa kwi-converter okanye kwi-electric arc furnace. Ulwakhiwo lweekhemikhali luyalungiswa ukuze luhlangabezane nomgangatho wentsimbi ofunekayo.

    2. Ukuphosa Okuqhubekayo

    Intsimbi enyibilikisiweyo iqina kwi-caster eqhubekayo ukuze yenze ii-slabs, ezidla ngokuba yi-150–250 mm ubukhulu.

    3. Ukuphinda Ufudumale Isithando Somlilo

    Iislabs zifudunyezwa ukuya kuthi ga kwi-1100–1250°C ukuze zilungele ukuqengqeleka.

    4. Isixhobo sokuGxobhoza

    Iislabhu ezishushu zidlula kwiindawo zokurhawuzelela, apho zinde khona kwaye zincitshiswe ngobukhulu ukuze zenze umcu wokuqala wentsimbi.

    5. Umatshini Wokugqibezela

    Umcu uphinda ugoqwe ngothotho lweendawo zokugqiba ukuze kufikelelwe kubukhulu obujoliswe kubo (1.2–25 mm) ngomgangatho womphezulu ophuculweyo kunye nokuchaneka kobukhulu.

    6. Ukupholisa iLaminar

    Umcu oshushu upholiswa ngokukhawuleza kusetyenziswa ukupholisa amanzi ahamba nge-laminar ukuze kufezekiswe isakhiwo esifunekayo kunye neempawu zoomatshini.

    7. Ukujijeka

    Umcu opholileyo ufakwa kwiiHot Rolled Steel Coils (ngesiqhelo yi-10–30 MT ngekhoyili nganye).

    8. Ukuhlolwa kunye nokuPakisha

    Ubukhulu, ububanzi, umphezulu, kunye neempawu zoomatshini ziyavavanywa. Iikhoyili ezifanelekileyo ziyabotshwa, zilebhelishwe, kwaye zilungiselelwe ukugcinwa okanye ukuthunyelwa.

    Isicelo Esiphambili

    Iimbonakalo

    1. Ukumelana Nokugqwala: I-Galvanizing yindlela yokuthintela ukugqwala engabizi kakhulu nesebenzayo esetyenziswa rhoqo. Malunga nesiqingatha semveliso ye-zinc yehlabathi isetyenziselwa le nkqubo. I-Zinc ayenzi nje kuphela umaleko okhuselekileyo kumphezulu wentsimbi, kodwa ikwanomphumo wokukhusela i-cathodic. Xa i-zinc coating yonakele, isenokuthintela ukugqwala kwezinto ezisekwe kwisinyithi ngokukhusela i-cathodic.

    2. Ukusebenza kakuhle kokugoba nokubanda kunye nokuwelda: kusetyenziswa kakhulu intsimbi enekhabhoni ephantsi, nto leyo efuna ukugoba kakuhle nokubanda, ukusebenza kakuhle kokuwelda kunye nokusebenza okuthile kokunyathela

    3. Ukukhanya okubonakalayo: ukukhanya okuphezulu, okwenza kube ngumqobo wobushushu

    4. Ingubo Iqinile Kakhulu, kwaye ingubo ye-zinc yenza isakhiwo esikhethekileyo se-metallurgical, esinokumelana nomonakalo woomatshini ngexesha lokuthuthwa nokusetyenziswa.

    Isicelo

    Iikhoyili zentsimbi ezigayiweyoIimveliso zisetyenziswa kakhulu kulwakhiwo, kushishino olukhanyayo, kwiimoto, kwezolimo, kwezilwanyana, kwezokuloba, kurhwebo nakwamanye amashishini. Ishishini lokwakha lisetyenziswa kakhulu ekwenzeni iiphaneli zophahla ezichasene nokugqwala kunye neegrating zophahla kwizakhiwo zoshishino nezoluntu; Kwishishini elikhanyayo, lisetyenziselwa ukuvelisa amagobolondo ezixhobo zasekhaya, iitshimini zoluntu, izixhobo zasekhitshini, njl. Kwishishini leemoto, lisetyenziswa kakhulu ukuvelisa iindawo zeemoto ezinganyangekiyo kukugqwala, njl.njl. Ezolimo, kwezilwanyana kunye nokuloba zisetyenziswa kakhulu njengendawo yokugcina ukutya kunye nokuthutha, izixhobo zokucubungula inyama kunye neemveliso zasemanzini, njl.njl.; Lisetyenziswa kakhulu ekugcineni nasekuthuthweni kwezinto kunye nezixhobo zokupakisha.

    图片2

     Iiparameters

    Igama lemveliso

    Ikhoyili yentsimbi egalelweyo
    Ikhoyili yentsimbi egalelweyo I-ASTM, EN, JIS, GB
    Ibanga Dx51D, Dx52D, Dx53D, DX54D, S220GD, S250GD, S280GD, S350GD, S350GD, S550GD; SGCC, SGHC, SGCH, SGH340, SGH400, SGH440, SGH490,SGH540, SGCD1, SGCD2, SGCD3, SGC340, SGC340 , SGC490, SGC570; SQ CR22 (230), SQ CR22 (255), SQ CR40 (275), SQ CR50 (340), SQ

    CR80(550), CQ, FS, DDS, EDDS, SQ CR33 (230), SQ CR37 (255), SQCR40 (275), SQ CR50 (340), SQ CR80 (550); okanye iMfuneko yoMthengi
    Ubukhulu I-0.10-2mm ingenziwa ngokwezifiso ngokufanelekileyo imfuneko yakho
    Ububanzi 600mm-1500mm, ngokweemfuno zomthengi
    Ezobugcisa Ikhoyili eshushu efakwe ngesinyithi
    Ukwaleka kweZinc 30-550g/m2
    Unyango Lomphezulu Ukudlulisa i-passivation, Ukufaka i-oyile, ukutywina i-lacquer, i-phosphate, enganyangwanga
    Umphezulu i-spangle eqhelekileyo, i-mis spangle, eqaqambileyo
    Ubunzima bekhoyili I-2-15metric ton nganye nge-coil
    Iphakheji Iphepha elingangeni manzi lipakishwe ngaphakathi, intsimbi eqinisiweyo okanye iphepha lentsimbi eligqunyiweyo lipakishwe ngaphandle, ipleyiti yonogada esecaleni, emva koko isongweibhande lentsimbi ezisixhenxe. okanye ngokweemfuno zomthengi
    Isicelo ukwakhiwa kwesakhiwo, i-gring yentsimbi, izixhobo

    Iinkcukacha

    镀锌卷_02
    镀锌卷_03
    镀锌卷_04
    镀锌卷_05
    镀锌卷_06
    镀锌卷_07
    镀锌卷_08
    W BEAM_07

    FAQ

    1. Angakanani amaxabiso akho?

    Amaxabiso ethu anokutshintsha ngokuxhomekeke kubonelelo kunye nezinye izinto ezikwimarike. Siza kukuthumelela uluhlu lwamaxabiso oluhlaziyiweyo emva kokunxibelelana nenkampani yakho.

    nathi ukuze ufumane ulwazi oluthe kratya.

    2. Ngaba unayo iodolo encinci?

    Ewe, sifuna zonke ii-odolo zamazwe ngamazwe zibe nomlinganiselo omncinci we-odolo oqhubekayo. Ukuba ujonge ukuthengisa kwakhona kodwa ngobuninzi obuncinci kakhulu, sicebisa ukuba ujonge iwebhusayithi yethu.

    3. Ngaba ungasinika amaxwebhu afanelekileyo?

    Ewe, singabonelela ngobuninzi bamaxwebhu kuquka neeSatifikethi zoHlalutyo/zoKuhambelana neMithetho; i-Inshorensi; iMvelaphi, kunye namanye amaxwebhu okuthumela ngaphandle apho kufuneka khona.

    4. Lithini ixesha eliqhelekileyo lokunika ingqwalasela?

    Kwiisampuli, ixesha lokunika i-lead limalunga neentsuku ezisi-7. Kwimveliso enkulu, ixesha lokunika i-lead limalunga neentsuku ezi-5-20 emva kokufumana intlawulo yedipozithi. Amaxesha okunika i-lead aqala ukusebenza xa

    (1) siyifumene idiphozithi yakho, kwaye (2) sinemvume yakho yokugqibela yeemveliso zakho. Ukuba amaxesha ethu okufumana imveliso awasebenzi nomhla wokugqibela, nceda ujonge iimfuno zakho ngokuthengisa kwakho. Kuzo zonke iimeko siya kuzama ukuhlangabezana neemfuno zakho. Kwiimeko ezininzi siyakwazi ukwenza njalo.

    5. Zeziphi iindlela zokuhlawula ozamkelayo?

    I-30% kwangaphambili nge-T/T, i-70% iya kuba ngaphambi kokuthunyelwa kwesiseko kwi-FOB; i-30% kwangaphambili nge-T/T, i-70% ngokuchasene nekopi ye-BL basic kwi-CIF.

  • Ngaphambili:
  • Okulandelayo:

    • Imvelisoiindidi