ibhena_yephepha

Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo

Ityhubhu yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD, i-6m Round GI Pipe, esetyenziselwa ulwakhiwo, umfanekiso ocacileyo
  • Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo
  • Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo
  • Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo
  • Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo
  • Ipayipi yentsimbi eshushu edityiweyo ene-galvanized ye-48.3mm OD eyi-6m Round GI yokusetyenziswa kwesakhiwo

Inkcazo emfutshane:

Umbhobho wentsimbi oshushu ofakwe kwisinyithiyinto eqhelekileyoumbhobho wentsimbi yekhabhoniegqunywe phezu komphezulu wayo ngomaleko weizinki (Zn) ngenkqubo ethile. Olu maleko lwezinki lukhusela intsimbi njenge "isikrweqe"ukuyihlukanisa nomoya kunye nokufuma ngaphandle, nto leyo eyithintela ekubeni ingabi yi-oxidize, igrule kwaye ke ngoko yenza ubomi bentsimbi bube bude kakhulu."


  • I-alloy okanye Hayi:I-non-Alloy
  • Imilo yeCandelo:Ijikelezileyo
  • Umgangatho:I-AiSi, i-ASTM, i-BS, i-DIN, i-GB, i-JIS, i-GB/T3094-2000, i-GB/T6728-2002, i-ASTM A500, i-JIS G3466, i-DIN EN10210, okanye ezinye
  • Indlela yokusebenza:I-Hot Rolled, I-Cold Rolled, i-ERW, I-High-frequency welded, Ikhutshwe
  • Unyango Lomphezulu:Zero, Rhoqo, Mini, Big Spangle
  • Ukunyamezelana:±1%
  • Inkonzo Yokucubungula:Ukuwelda, Ukubethela, Ukusika, Ukugoba, Ukuhombisa
  • Ixesha lokuzisa:Iintsuku ezisi-7 ukuya kwezili-10
  • Isiqendu seNtlawulo:I-30% TT kwangaphambili, i-blance b ngaphambi kokuthunyelwa
    • I-Whatsapp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    umbhobho wentsimbi

    Iinkcukacha zeMveliso

    Lo mbhobho ungqukuva ongu-48.3mm ububanzi nguumbhobho wentsimbi eshushu edityiweyokwaye ihambelana ngokungqongqo nemigangatho yamazwe ngamazwe kuqukaBS1139/EN39Inokumelana nokugqwala okuhle kakhulu kwaye ihlala ixesha elide kakhulu kwindawo engaphandle kunyeubukhulu bomaleko we-zincixhomekeke ku200-500 g/m², ukuze ifaneleke kwindawo enobushushu obuphezulu, enomswakama ophezulu njengai-scaffolding yokwakha, isakhiwo semizi-mveliso, i-greenhousenjl. njl.

    镀锌圆管_12

    Isicelo Esiphambili

    Iimbonakalo

    1. Amandla aphezulu kunye nokuqina- Iipleyiti zentsimbi zenziwe ngentsimbi ekumgangatho ophezulu (Q235B, SS400, ST37, SS41, A36) enokubonelela ngomthamo omkhulu wokuthwala umthwalo.

    2. Ayinakonakalisa– Umphezulu ogqunywe ngentsimbi eshushu sisisombululo esisebenzayo nesihlala ixesha elide sokuthintela umhlwa kwindawo engaphandle, efumileyo okanye yemizi-mveliso.

    3. Ubungakanani obuqhelekileyo- Ubude, ububanzi kunye nobukhulu bodonga bunokwenziwa ngokwezifiso ukuze buhambelane neemfuno zakho zeprojekthi.

    4. Uluhlu olubanzi lokusetyenziswa- Ingasetyenziselwa ukwakha izikhewu, iibhulorho, iimoto, oomatshini, iziseko zoshishino kunye nokusetyenziswa ngaphandle.

    5.Ngokuthe ngqo kwiFactory Supply– Isitokhwe esikhulu, ukuhanjiswa ngokukhawuleza, ixabiso elikhuphisanayo kunye nemveliso esemgangathweni ozinzileyo.

    6. Umgangatho ochanekileyo kunye noSmooth- Ubukhulu bodonga obungaguqukiyo kunye nomphezulu ogudileyo kwenza ukufakwa kube lula kwaye kuqinisekisa ukomelela okuthembekileyo kwesakhiwo.

    Isicelo

    1. I-Scaffolding yoLwakhiwo: Izibonda zokwakha eziqinileyo zokufaka izikhonkwane, ukwakha, kunye nokuhlaziya.

    2. Izakhiwo zeMvelisoImizila yemveliso, izixhobo zezityalo, umsebenzi onzima

    3. Ulwakhiwo lweeBridges kunye neInfra: Ukwakhiwa okunzima kweebhulorho eziqinileyo zamatye, amaqonga kunye nomsebenzi wokwakha.

    4.Iimoto kunye noomatshini: Izakhiwo, izibiyeli kunye nezixhaso zezithuthi, iitreyila, izixhobo zoshishino nokunye.

    5. Imibhobho yamanzi negesi: Iinkqubo zeMibhobho eziXinzelelo oluPhantsi kwiZakhiwo zaseKhaya, zorhwebo, nezeMizi-mveliso.

    6. Ukubiyela kunye neZakhiwo zangaphandle: Amasango, iiRailing, iiGuardrails kunye nazo zonke izakhiwo zangaphandle ezifuna ukhuseleko lwexesha elide.

    镀锌圆管_08

    Iiparameters

    Igama lemveliso
    Ubukhulu bodonga
    1mm-12mm, okanye njengoko ufuna
    Ububanzi obungaphandle
    20mm-508mm, okanye njengoko ucelile
    Ubude
    5m-14m, 5.8m, 6m, 10m-12m, 12m okanye njengezicelo zomthengi zokwenyani
    Unyango Lomphezulu
    i-galvanized
    Ubude
    Iimfuno zoMthengi
    Ukwaleka kweZinc
    30-275g/m2
    Ukupakisha
    Ukupakisha Okuqhelekileyo Okufanelekileyo Elwandle
    Ixesha lexabiso
    I-FOB, i-EXW, i-CFR, i-CIF
    Immimiselo yokuhlawula
    I-L/CT/TD/A, njl. njl.

    Iinkcukacha

    镀锌圆管_02
    镀锌圆管_03

    I-zinc coating ingalungiswa ukusuka kwi-30g/m² ukuya kwi-550g/m² ngeenkqubo ezahlukeneyo ezifana ne-hot-dip galvanizing, i-electro-galvanizing kunye ne-pre-galvanizing. Zonke iimveliso zinengxelo yokuhlolwa ukuqinisekisa ukuthotyelwa komgangatho kunye nokusebenza.

    Bonke ubukhulu benziwa ngokungqongqo ngokwesivumelwano esifunekayo, ngokuchanekileyo kwe-±0.01mm. Umaleko we-galvanized uyafana kwaye ugudile, uneempawu ezilungileyo zokumelana nomhlwa, ungasetyenziswa ixesha elide.

    Sibonelela ngokusika nge-laser ngomphetho ogudileyo nococekileyo ukuqinisekisa ukuchaneka okuphezulu kokucutshungulwa. Iimveliso zingumbhobho omnye wentsimbi odityanisiweyo ngomthungo othe tye onomphezulu we-galvanized.

    Ubude obuqhelekileyo bokusika buziimitha ezi-6–12, kwaye sikwabonelela ngobude obuqhelekileyo baseMelika obuziimitha ezingama-20 kunye nama-40. Ubude obulungiselelwe wena (umz. iimitha ezili-13) buyafumaneka xa buceliwe.

    Njengoko sinomthamo wokugcina iitoni ezingama-50,000 kunye nemveliso yemihla ngemihla yeetoni ezingama-5,000 nangaphezulu, siqinisekisa ukukunika ukuhanjiswa okukhawulezayo, unikezelo oluzinzileyo kunye nexabiso elifanelekileyo kwiiprojekthi zehlabathi.

    镀锌圆管_04
    镀锌圆管_05
    镀锌圆管_06

    Ukupakisha okuqhelekileyo kombhobho wentsimbi ye-GI (galvanized iron) kunokwahluka ngokuxhomekeke kwizinto ezininzi kuquka umenzi, ubungakanani bombhobho kunye nobungakanani. Ngokwesiqhelo, imibhobho yentsimbi ye-GI ihlanganiswa kunye neentambo zesinyithi okanye zeplastiki, zibe ziimfumba okanye imigca, kuxhomekeke kubude bombhobho. Emva koko ipasela isongelwe ngeplastiki okanye ngengubo yelaphu kwaye ibotshelelwe ngokukhuselekileyo ukuthintela nayiphi na intshukumo ngexesha lokuthunyelwa.

    Ukongeza, abanye abavelisi banokubonelela ngokhuseleko olongezelelekileyo ngokubeka iphakheji ebhokisini yomthi okanye ukuyisonga ngeplastiki okanye ngekhadibhodi. Ukupakisha kungabandakanya iilebheli okanye iimpawu ezibonisa ubungakanani bombhobho wentsimbi we-GI, iinkcukacha, kunye nolunye ulwazi olufanelekileyo.

    Kubalulekile ukuqaphela ukuba ukupakisha okuqhelekileyo kusenokunganeli kuzo zonke iintlobo zokuthutha okanye zokugcina, ingakumbi xa kukho imibhobho emikhulu okanye imibhobho eneemfuno ezithile. Kwiimeko ezinjalo, amanyathelo ongezelelweyo anje ngokufaka i-buffering, i-insulation okanye izikhongozeli ezikhethekileyo anokufuneka ukuqinisekisa ukuthuthwa okukhuselekileyo kunye nokugcinwa kwemibhobho yentsimbi ye-GI.

    镀锌圆管_07

    Umbhobho we-galvanized sisixhobo sokwakha esisetyenziswa kakhulu kwaye sisetyenziswa kwiindawo ezahlukeneyo. Ngenxa yeziphumo zezinye izinto ezisingqongileyo ngexesha lokuthuthwa, kunokwenzeka ukuba umbhobho wentsimbi ugqwale, uphazamiseke okanye wonakale, ngoko ke ukupakishwa kunye nokuthuthwa kwemibhobho ye-galvanized kubaluleke kakhulu. Indlela yokuPakisha uMbhobho we-galvanized Ngexesha lokuthunyelwa, kuza kwaziswa kuwe.
    2. Imfuno yokuPakisha

    1. Umphezulu wombhobho wentsimbi kufuneka ucoceke kwaye wome ngaphandle kwegrisi, uthuli kunye nezinye izinto ezingcolisayo. Umbhobho wentsimbi kufuneka usongelwe ngeengqimba ezimbini zephepha eligqunywe ngeplastiki, umaleko ongaphandle yiplastiki enobukhulu obuyi-0.5mm kwaye umaleko ongaphakathi yifilimu yeplastiki yepolyethylene ecacileyo enobukhulu obuyi-0.02mm.
    2. Emva kokupakishwa, umbhobho wentsimbi kufuneka uphawulwe kwaye uphawu lubonise uhlobo lombhobho wentsimbi, iinkcukacha, inombolo yebhetshi kunye nomhla wokuveliswa.
    3. Ukuhlelwa kweepakethe zentsimbi Ngokweenkcazo ezahlukeneyo, ubungakanani kunye nobude, umbhobho wentsimbi ungahlelwa kwaye upakishwe, nto leyo elula ukulayisha nokukhupha kunye nokugcina.

    3, uhlobo lokupakisha

    1, Umphezulu wombhobho ogqunyiweyo kufuneka ucocwe kwaye womiswe ngaphambi kokuba upakishwe. Kuphephe ukubola kombhobho wentsimbi ekuthuthweni nasekugcinweni.

    2. Xa iipayipi ze-galvanized zipakishwe, kuyimfuneko ukuba kuqwalaselwe ukhuseleko lweepayipi zentsimbi, ii-splints ze-cork ezibomvu zingasetyenziselwa ukuqinisa iziphelo ezibini zeepayipi zentsimbi zithintela ukuguquka kunye nomonakalo kwiphakheji kunye nokuthunyelwa.

    3. Izixhobo zokupakisha iipayipi ezigqunyiweyo mazikwazi ukumelana nokufuma, ukumelana namanzi kunye nokugqwala, ukuze umbhobho wentsimbi ungachaphazeleki kukufuma kunye nokugqwala kwimpahla ethunyelwayo.

    4. Emva kokuba umbhobho we-galvanized upakishiwe, qiniseka ukuba uwugcina ungangenisi manzi kwaye ushushu ilanga ukuze ubonakale ixesha elide elangeni okanye kwindawo ejikelezileyo yomphunga.

    4, Izilumkiso
    1, Ubungakanani kunye nobude bombhobho we-galvanized kufuneka bube semgangathweni ngexesha lokupakisha ukuze kuthintelwe ukulahleka kobukhulu.

    2. Kukho imfuneko yokuphawula nokulungisa ukupakisha kwepayipi ye-galvanized ngokukhawuleza emva kokupakisha ukuze kulawulwe kwaye kugcinwe.
    3. Ukupakisha imibhobho ye-galvanized kufuneka kuthathelwe ingqalelo ukuphakama kunye nozinzo lweempahla ezibekwe ndawonye, ​​kwaye kuphephe ukuthambekela kweempahla okanye ukubekeka phezulu kakhulu kungonakalisa iimpahla.

     

    Iphepha Lophahla Olunezikhonkwane (2)

    FAQ

    Q1: Ingasebenza ixesha elingakanani?

    A: Ubukhulu be-zinc coating bunokuba yi-200-500g/m² ukuze busetyenziswe ngaphandle kwiminyaka engama-20-30, nto leyo ingcono kakhulu kunobo bemibhobho eqhelekileyo ene-electro-galvanized.

    Umbuzo 2: Yeyiphi imigangatho ehambelana nayo?

    A: Ihambelana ngokupheleleyo nemigangatho yamazwe ngamazwe ye-GB, i-ASTM, i-EN, i-JIS kunye ne-DIN kunye nokunye. Ezi mpahla ziza ne-MTC (isatifikethi sokuhlolwa komgangatho womenzi).

    Umbuzo 3: Ngaba kunokwenzeka ukwenza ngokwezifiso iziphelo zepayipi?

    A: Ewe. Iziphelo ezingenanto, iziphelo ezinemisonto, iziphelo ezinemiqolo okanye iziphelo ezineebheyile, kunye nezigqubuthelo zeplastiki zokukhusela zingafakwa ukuba kuyimfuneko.

    Umbuzo 4: Yintoni umahluko phakathi kwe-hot-dip galvanizing kunye ne-pre-galvanizing?

    A: Emva kokwakheka, i-hot dip galvanizing yipayipi efakwe kwi-zinc, i-zinc coating iya isiba nkulu kwaye ibonelela ngokhuseleko olungcono lwe-weld; I-pre-galvanizing ayibizi kakhulu, kodwa ubukhulu bayo be-zinc layer buncinci kwaye ukumelana kwayo nokugqwala kubuthathaka kancinci.

    Q5: Ungaqinisekisa njani umgangatho we-odolo enkulu?

    A: Ibhetshi nganye iphantsi koxinzelelo kunye novavanyo lwe-zinc coat. Ungaqinisekisa ukuba ukuthotyelwa kwemilinganiselo yokubhida kuqinisekiswa kukujongwa ngumntu wesithathu yi-SGS/BV kunye nabanye.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Imvelisoiindidi