ibhena_yephepha

Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni

Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | Umfanekiso oQhelekileyo we-ASTM A53/EN 39
  • Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni
  • Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni
  • Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni
  • Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni
  • Ityhubhu ye-scaffolding efakwe kwi-galvanized eshushu | OD 48.3mm x 3.2mm | I-ASTM A53/EN 39 esemgangathweni

Inkcazo emfutshane:

I-hot-dip galvanization luhlobo lwe-galvanization. Yinkqubo yokugquma intsimbi kunye nentsimbi nge-zinc, edibanisa nomphezulu wesinyithi esisisiseko xa untywilisela isinyithi kwibhafu ye-zinc enyibilikisiweyo kubushushu obumalunga ne-450 °C (842 °F).


  • I-alloy okanye Hayi:I-non-Alloy
  • Imilo yeCandelo:Ijikelezileyo
  • Umgangatho:I-AiSi, i-ASTM, i-BS, i-DIN, i-GB, i-JIS, i-GB/T3094-2000, i-GB/T6728-2002, i-ASTM A500, i-JIS G3466, i-DIN EN10210, okanye ezinye
  • Indlela yokusebenza:Ezinye, Eziqengqelekayo Ezishushu, Eziqengqelekayo Ezibandayo, ERW, Ezinxityiweyo rhoqo, Ezikhutshiweyo
  • Unyango Lomphezulu:Zero, Rhoqo, Mini, Big Spangle
  • Ukunyamezelana:±1%
  • Inkonzo Yokucubungula:Ukuwelda, Ukubethela, Ukusika, Ukugoba, Ukuhombisa
  • Ixesha lokuzisa:Iintsuku ezisi-7 ukuya kwezili-10
  • Isiqendu seNtlawulo:I-30% TT kwangaphambili, i-blance b ngaphambi kokuthunyelwa
    • I-Whatsapp

    Iinkcukacha zeMveliso

    Iithegi zeMveliso

    Iinkcukacha zeMveliso

    Umbhobho we-galvanized oshushuyenziwe ngenkqubo yesinyithi apho intsimbi ifakwa kwi-zinc enyibilikisiweyo kwaye ukuba i-zinc idibana nentsimbi ukuze yenze umaleko we-zinc-iron alloy onamathela kwintsimbi. Le nkqubo ibandakanya ukucola ukususa ukungcola kwentsimbi engaphezulu kunye ne-iron oxide, ukucoca okomileyo nge-ammonium chloride, i-zinc chloride, okanye umxube wetyuwa. Umbhobho wentsimbi emva koko ufakwa kwi-zinc enyibilikisiweyo apho i-bead ye-zinc iyijikelezile, ngeli xesha kwenzeka iimpembelelo ezintsonkothileyo zomzimba nezekhemikhali ezikhokelela kumaleko we-alloy oqinileyo, omelana nokugqwala. Oku kwenza umaleko we-zinc ococekileyo oxubana ngokungenamthungo phakathi kwe-substrate kunye nomaleko we-electrolytic onika ukugubungela okulinganayo ukunamathela okuphezulu kunye nokumelana nokugqwala kwexesha elide okwenza ukuba ifaneleke kwizicelo zoshishino, zokwakha kunye neziseko zophuhliso.

    镀锌圆管_12

    Isicelo Esiphambili

    Iimbonakalo

    1. Ukumelana nokugqwala okuphezulu

    I-hot-dip galvanizing yenza umaleko we-zinc-iron alloy oqinileyo okhusela intsimbi kumhlwa, nokuba ikwindawo engaphandle nefumileyo.

    2. Amandla aphezulu kunye nokuqina

    Zenziwe ngentsimbi yesakhiwo esemgangathweni, ezi mbhobho zimelana nemithwalo enzima kunye nokusetyenziswa ngokuphindaphindiweyo kwiindawo zokufaka izikhonkwane.

    3. Ukwaleka kweZinc okulinganayo

    Inkqubo yokwenza i-galvanizing iqinisekisa ukutyeba okuhlala kufana, ukugquma ngokupheleleyo, kunye nokukhuselwa okuhlala ixesha elide.

    4. Ubungakanani obunokwenzeka ngokwezifiso

    Ifumaneka ngobubanzi obahlukeneyo, ubukhulu bodonga, kunye nobude ukuze ihlangabezane neemfuno ezithile zeprojekthi.

    5.Ukugcinwa okuphantsi kunye nobomi benkonzo ende

    Umngcipheko wokuncipha kokugqwala unciphisa iindleko zokulungisa kwaye wandisa ubomi bezakhiwo ze-scaffolding.

    Isicelo

    1. Iinkqubo ze-scaffolding– Indawo yokwakha, ukugcinwa kwesakhiwo kunye nesakhiwo sexeshana.

    2. Amaqonga eeMveliso– Iinkxaso zefektri, indawo yokugcina impahla, kunye nezixhobo zoshishino.

    3. Ukulungisa iifomu kunye nokulungisa– Ukwakhiwa kwekhonkrithi ukuze kubekho uzinzo kwisakhiwo.

    4. Izakhiwo zexeshana– Amanqanaba eziganeko, iindawo zokubonisa, kunye neentente zexeshana.

    5. Ulwakhiwo lwangaphandle– Ayikwazi ukumelana nokugqwala xa isetyenziswa kwiibhulorho, kwiipayipi, nakwiiprojekthi zaselwandle.

    镀锌圆管_08

    Iiparameters

    Igama lemveliso

    Umbhobho wesinyithi
    Ibanga Q235B, SS400, ST37, SS41, A36 njl.
    Ubude I-Standard 6m kunye ne-12m okanye ngokweemfuno zomthengi
    Ububanzi 600mm-1500mm, ngokweemfuno zomthengi
    Ezobugcisa Ishushu Ityiwe Ngesinyithiumbhobho
    Ukwaleka kweZinc 30-275g/m2
    Isicelo Isetyenziswa kakhulu kwizakhiwo ezahlukeneyo, iibhulorho, izithuthi, iibracker, oomatshini njl.njl.

    Iinkcukacha

    镀锌圆管_02
    镀锌圆管_03
    镀锌圆管_02
    镀锌圆管_03
    镀锌圆管_04
    镀锌圆管_05
    镀锌圆管_06
    镀锌圆管_07
    镀锌圆管_10
    I-PPGI_14

    FAQ

    Q1: Bungakanani ubukhulu kunye nobubanzi bodonga obufumanekayo?

    A: Sinikezela ngoluhlu lweedayamitha ukusuka kwi-21.3mm ukuya kwi-89mm kunye nobukhulu bodonga ukusuka kwi-2.0mm ukuya kwi-4.0mm, olunokulungiselelwa ngokweemfuno zeprojekthi.

    Umbuzo 2: Luhlobo luni lwentsimbi olusetyenziswa kwezi payipi?

    A: Sisebenzisa intsimbi yolwakhiwo esemgangathweni ophezulu ukuqinisekisa ukuba inamandla kwaye ihlala ixesha elide, ifanelekile kwi-scaffolding nakwimisebenzi enzima.

    Umbuzo 3: Isetyenziswa njani i-galvanized coating?

    A: Iipayipi zigqunywe nge-hot-dip galvanized, zenza umaleko oqinileyo we-zinc-iron alloy obonelela ngokugquma okufanayo kunye nokumelana nokugqwala okuhlala ixesha elide.

    Q4: Ingakanani ubomi benkonzo eqhelekileyo?

    A: Xa isetyenziswa ngokufanelekileyo, imibhobho yescaffolding efakwe i-hot-dip galvanized ingahlala iminyaka eli-15 ukuya kwengama-20, nokuba ikwiindawo ezingaphandle nezifumileyo.

    Q5: Ngaba ungabonelela ngobude kunye neenkcukacha ezenziwe ngokwezifiso?

    A: Ewe, sinikezela ngobude, ububanzi, kunye nobukhulu bodonga ngokwezifiso ukuhlangabezana neemfuno zakho zeprojekthi ethile.

  • Ngaphambili:
  • Okulandelayo:
    • Bhala umyalezo wakho apha uze uwuthumele kuthi

    Imvelisoiindidi